Hatteland Display AS - HD 55T22 MVD - Console Mount 4K UHD Display

Type Number:

HD 55T22 MVD-MAx-CORx

TFT Technology:

LED Backlight Technology, TFT active-matrix liquid crystal panel,
Widescreen, RGB Vertical Stripe, MVA (Multi-domain Vertical Alignment)
LCD Technology

Viewable Size and Active Area:

55.0 inch - 1209.60 [47.62''] (H) x 680.40 [26.79''] (V) mm [inch]

Native Resolution and Pixel Pitch:

3840 x 2160 (UHD) - 0.315 (H) x 0.315 (V) mm

Aspect Ratio and Response Time:

16:9 - 6.5ms (typical) (G to G)

Light Intensity and Contrast Ratio:

450 cd/m² (typ) - 4000:1 (typ)

View Angle and Max Colors:

89 deg. (up/down/left/right) - 16.7 million

Optimal Resolution and Hz:

3840 x 2160 @ 60 Hz

Detectable Resolutions:

VGA (640 x 350) to UHD (3840 x 2160)

Composite Video Input(s):

None

Supported Video Signals:

None

Product Features:

Full Dimming 0-100%, Multi-power AC & DC, Optical Bonding Technology,
PIP (Picture In Picture), Console Mount Model, External Remote

Power Specifications and Consumption:

Multi-power 115/230VAC - 50/60Hz + 24VDC
Operating AC/DC: 145W (typ) - 220W (max)

User Controls and Activity:

External Remote Controller via HD REM SX1-A1:
3 physical buttons for user interaction, but conforms with the
standardized 6 button functionality; (Brightness+, Brightness-, Menu,
Navigation<, Navigation> and Power).
Communicates via Hatteland Display® SCOM RS-485 protocol

Connectors:

• DVI-D Input**: 1 x 24p DVI (female) - Max 3840x2160@30Hz
• VGA Input**: 1 x 15p HD D-SUB (female) - Max 1920x1200@60Hz
• HDMI 2.0 Input**: 1 x 19p HDMI (female) - Max 3840x2160@60Hz
• DP 1.2 Input**: 1 x 20p DisplayPort (female) - Max 3840x2160@60Hz
• SCOM+Touch: 1 x USB TYPE A Connector (female)
• SCOM RS-422/485: 2 x 5-pin T. Block 3.81 non-isolated+Buzzer
• SCOM Ethernet*: 1 x RJ45 Connector
• SCOM RS-232*: 1 x 9p D-SUB (female) non-isolated
• User Interface***: 1 x 9p D-SUB (male) - Potentiometer Analog Input,
User Brightness (BRT), I2C and +5VDC & 12VDC OUT
• SW Interface: 1 x USB TYPE A (female) for Firmware Update
• GDCx Interface: 1 x 15p D-SUB (male) for GDC Hardware Comm.
• AC Power IN: 1 x Std IEC Inlet
• DC Power IN: 1 x 2p D-SUB Connector (male) - Amphenol FCC17

*SCOM via Ethernet/RS-232 is inhibited if HD REM SX1-A1 is in use.
**Alternative solution for brightness adjustment is DDC/CI or use user
interface for brightness and on/off controls.
***HD REM SX1-A1 can be removed and SCOM can be used.

Product Dimensions and Weight:

W:1346.83 [53.02''] x H:817.63 [32.19''] x D:99.00 [3.90''] mm [inch]
Approx. 70.2kg / 154.4lbs

Product Carton Size and Weight:

L:1570 [61.81''] x W:990 [38.98''] mm x H:340 [13.39''] mm [inch]
TBD kg / TBD lbs

Factory Options:

• Projected Capacitive Touch Screen (Multitouch, USB, Pen/Glove support)

Accessories:

• HD REM SX1-A1: 1 x External Remote Control, EN60945 Tested

Capabilities / Prepared for:

• Color Calibrated models (ECDIS)*
• Revised User Controls with ECDIS Compliance*
*Please review model HD 55T22 MVD-MAx-COTx datasheet.

Operating Temperature:

-15.0°C / 5.0°F to 55.0°C / 131.0°F, Humidity up to 95%

Storage Temperature:

-30.0°C / -22.0°F to 70.0°C / 158.0°F, Humidity up to 95%

IP Rating:

Protection: IP66 front - IP22 rear (EN60529)

Compass Safe Distance:

Standard: 500.00 [196.85''] - Steering: 230.00 [90.55''] cm [inch]

Type Approval, Testing and Certificates:

IEC 60945 4th (EN 60945:2002), IACS E10,
EU-RO-MR - Mutual Recognition

Specifications last updated: October 04, 2018 - 14:28


Copyright © 2018 Hatteland Display® AS - All international rights reserved. Contact us: +47 4814 2200 - mail@hatteland-display.com	Information, pictures, illustrations and content may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form from this website without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.