Company Logo

Friday, January 11, 2013

Engineering Change Notification (ECN)

Series X - Firmware updates

New firmware (FW) versions are under implementation step by step in our production, fully implemented by January 13th 2013.

HD 12T21 MMD-xxx-xxxx
HD 15T21 MMD-xxx-xxxx
HD 17T21 MMD-xxx-xxxx
HD 19T21 MMD-xxx-xxxx
HD 24T21 MMD-xxx-xxxx
HD 26T21 MMD-xxx-xxxx


Ethernet port for MMD versions (FW:E121003V1):
- Upgrade, to make all SCOM commands working through Ethernet.

Glass Display Control™ (GDC) / OSD, added features (FW:121023R0V01):
- Brightness value after power off is restored back to last value set.
- Issue with GDC on/off status getting out of sync solved.

Video chipset update (FW:1212xxV1 and 1301xxV1):
- Fix issue with setting IP address.
- Support external potentiometer and +/- BRT (brightness) buttons.
- Hotkey and source label will have same name as set source name in OSD (OnScreen Display menu).

New OSD commands added:
OSD Lock Mode (full) - Set GDC button protection mode (password request on all buttons).
OSD Key Outdoor - Set GDC mode on/off (5 sec delay for all buttons).

New SCOM commands added:
FHA - Potentiometer enable/disable.
GMB - Set GDC Minimum Brightness.


Review attached updates of User Manual and SCOM Technical Manual.

For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.

Implemented by:
Frode Grindheim
Vice President Product Management
Hatteland Display AS
Read and Understood by:

(Your name and Company)

Links to relevant file(s):
image INB100519-1 (rev 5) (6.9mb) User Manual, Maritime Multi Display (MMD) - Series X
image INB100018-4 (rev 2) (2.0mb) Technical Manual, Serial/Ethernet Communication, Series X Displays

Document Reference ID: 01_2013_ECN

Hatteland Display AS
囈sosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - Fax: (+47) 5276 5444