Company Logo

Thursday, September 29, 2016

Engineering Change Notification (ECN)

Series 1 - Maritime Multi Display (MMD)

Hatteland Display hereby informs about changes for the following model(s):


image
image
JH 15T17 xxD-xxx-xxxx JH 19T14 xxD-xxx-xxxx


image
image
JH 20T17 xxD-xxx-xxxx JH 22T11 xxD-xxx-xxxx


image
JH 23T14 xxD-xxx-xxxx


CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S):
JH 15T17 xxD-xxx-xxxx
JH 19T14 xxD-xxx-xxxx
JH 20T17 xxD-xxx-xxxx
JH 22T11 xxD-xxx-xxxx (Revised - added to this document 7 December 2016)
JH 23T14 xxD-xxx-xxxx
Note: Customized models are ALSO affected by this Engineering Change Notification.


EFFECTIVE FROM:
Gradual implementation starting from November 28th 2016.

Existing Product Type Numbers remain unchanged. Revised Datasheets and User Manual/Technical Manuals available below.


CHANGE(S):
- LED indicators on keypad, brightness change.
- Orange LED indicators on keypad disabled/removed.
- Keypad rubber material change.
- Implementation of BRI command in SCOM protocol.

For details, see below.


ADDITIONAL INFORMATION:
Brightness change, LED indicators:
Requirements in IEC 62288 Edition 2.0 is max 1cd/m2, and readable in night mode.
- Firmware is updated to comply with this requirement.

Orange LED indicators:
- Before change: Orange LED's on the keypad when buzzer is activated.
- After change: No LED's when buzzer is activated.
Reason for change: to comply with IEC62288 Edition 2.0.

Rubber change, surface treatment:
- Existing surface treatment is End of Life (factory change).
- New paint and process has been identified, tested and approved.
- Improved cosmetic appearance.

SCOM BRI command:
- Added support for BRI, please refer to page 11 in the SCOM Technical Manual (INB100018-3).



For further enquiries regarding this Engineering Change Notification, please contact HelpDesk at Hatteland Display.




Implemented by:
____________________________________________________
image
Frode Grindheim
Vice President Product Management
Hatteland Display AS
Read and Understood by:
_______________________________________



(Your name and Company)


Links to relevant file(s):
image ds_jh15t17mmd-xxx-axxx.pdf (405.1kb) JH 15T17 MMD
15.0 inch datasheet
image ds_jh19t14mmd-mxx-sxxx.pdf (447.8kb) JH 19T14 MMD-S (Slim Frame)
19.0 inch datasheet
image ds_jh19t14mmd-xxx-axxx.pdf (496.3kb) JH 19T14 MMD
19.0 inch datasheet
image ds_jh20t17mmd-xxx-axxx.pdf (479.0kb) JH 20T17 MMD
20.1 inch datasheet
image ds_jh22t11mmd-xxx-axxx.pdf
(Revised - added to this document 7 December 2016)
(479.0kb) JH 22T11 MMD
22.0 inch datasheet
image ds_jh23t14mmd-xxx-axxx.pdf (520.9kb) JH 23T14 MMD
23.1 inch datasheet
image inb100036-1_usermanual_series1_mmd_rev33.pdf
(Revised to #33 - added to this document 7 December 2016)
(17.2mb) User Manual Series 1 (MMD)
rev 32
image inb100018-3_technical_manual_serial_communication_control_interface(scom)_series1_rev09.pdf (1.4mb) Technical Manual
SCOM Series 1 (MMD)
rev 9
 

Document Reference ID: 15_2016_ECN

Hatteland Display AS
Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200
www.hatteland-display.com