Hatteland Technology AS - HN G9084-LA

Type Number:

HN G9084-LA

Description:

12-port slim type managed Gigabit

Physical Ports:

8 x 10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX
4 x 100/1000Base-X with SFP port

Technology:

IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,IEEE 802.3ad for LACP (Link Aggregation
Control Protocol ), IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging, IEEE 802.1D for STP (Spanning Tree
Protocol), IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) ,IEEE 802.1x for
Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table: 8192 MAC addresses
Priority Queues: 8
Processing: Store-and-Forward
Share Data Buffer: 4Mbit

Switch Properties: Switching latency: 7 us, Switching bandwidth: 24Gbps,
Throughput (packet per second): 17.856Mpps@64Bytes packet, Max.
Number of Available VLANs: 4096, VLAN ID Range: VID 0 to 4095, IGMP
multicast groups: 256 for each VLAN, Port rate limiting: User Define

Jumbo frame: Up to 9.6k bytes

Security Features: Device Binding security feature, Enable/disable ports,
MAC based port security, Port based network access control (802.1x),
VLAN (802.1Q ) to segregate and secure network traffic, Radius
centralized password management, SNMPv3 encrypted authentication
and access security, Https / SSH enhance network security

Software Features: STP/RSTP/MSTP (IEEE 802.1D/w/s), Redundant Ring
(O-Ring) with recovery time less than 20ms over 250 units, TOS/DiffServ
supported, Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging, IGMP Snooping, IP-based bandwidth
management, Application-based QoS management, DOS/DDOS auto
prevention, Port configuration, status, statistics, monitoring, security,
DHCP Server/Client/Relay, SMTP Client, Modbus TCP, Ethernet/IP™,
NTP server

Network Redundancy: O-Ring, Open-Ring, O-Chain, MRP*NOTE, MSTP
(RSTP/STP compatible)

RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable.
115200bps, 8, N, 1

LED Indicators:

Power Indicator (PWR): Green: Power LED x 3

Ring Master Indicator (R.M.): Green: Indicates that the system is
operating in O-Ring Master mode

Ring Indicator (Ring): Green: Indicates that the system operating in
O-Ring mode, Green Blinking: Indicates that the Ring is broken.

Fault Indicator (Fault): Amber: Indicate unexpected event occurred

10/100/1000Base-T(X) RJ45 Port Indicator: Green for Port LINK/ACT
indicator, Dual color LED for speed indicator: Green for 1000Mbps / Amber
for 100Mbps / off-light for 10Mbps

100/1000Base-X SFP Port Indicator: Green for port Link/Act

DIP-Switch:

DIP-Switch 1: Power-1 failed warning (ON) enable, (OFF) disable
DIP-Switch 2: Power-2 failed warning (ON) enable, (OFF) disable

Fault Contact:

Relay output to carry capacity of 1A at 24VDC

Reset Function:

< 5 sec: System reboot, > 5 sec: Factory default

Power Specifications:

Redundant Input power: Dual DC inputs. 12 ~ 48VDC on 6-pin terminal block
Power consumption (Typ.): 13 Watts
Overload current protection: Present
Reverse Polarity Protection: Present
Hi-POT: 1.5KV AC

Physical Characteristics:

Enclosure: IP-30
Dimensions:
W: 54.30 [2.14''] x H:45.10 [5.71''] x D:108.30 [4.26''] mm [inch]
Weight: 779g

Environmental:

Storage Temperature: -40 to +85°C (-40 to 185°F)
Operating Temperature: -40 to +75°C (-40 to 167°F)
Operating Humidity: 5% to 95% Non-condensing

Regulatory approvals:

EMC: CE EMC (EN 55024, EN 55032), FCC Part 15 B
EMI: EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3,
FCC Part 15 B class A

EMS: EN 55024 (IEC/EN 61000-4-2 (ESD: Contact 8KV, Air 10KV),
IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT Power 2KV, Single 2KV),
IEC/EN 61000-4-5 (Surge: Power 4KV, RJ45 4KV), IEC/EN 61000-4-6 (CS),
IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))

Shock: IEC60068-2-27
Free Fall: IEC60068-2-31
Vibration: IEC60068-2-6
Safety: EN60950-1 compliant

Type Approvals:

IEC 60945 4th (EN 60945:2002), IACS E10,
EU RO MR - Mutual Recognition (pending)

MTBF:

551378 hours

Warranty:

5 years

Contents of Package:

• 1 x HN G9084-LA
• 1 x Quick Installation Guide
• 1 x Din-Rail Kit
• 2 x Wall-Mount Kit
• 1 x Tool Software CD
• 1 x Console Cable

Accessories:

• SDR-120-24: 1 x Power supply 24 VDC, 5A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-120-48: 1 x Power supply 48 VDC, 2.5A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-240-24: 1 x Power supply 24 VDC, 10A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-240-48: 1 x Power supply 48 VDC, 5A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-480-24: 1 x Power supply 24 VDC, 20A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-480-48: 1 x Power supply 48 VDC, 10A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• HN SFP1G-LX10: 1 x 1Gbps SFP optical transceiver, single-mode / 10km,
1310nm, -40 ~ +75°C
• HN SFP1G-SX: 1 x 1Gbps SFP optical transceiver, multi-mode / 550m,
850nm, -40 ~ +75°C
• HN SFP1G-RJ: 1 x 1Gbps SFP to 1000 Base-T transceiver, -40 ~ +75°C

Specifications last updated: February 25, 2020 - 13:55


Copyright © 2020 Hatteland Technology AS All international rights reserved. Contact us: +47 4814 2200 - mail@hattelandtechnology.com	Information, pictures, illustrations and content may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form from this website without the prior written consent of Hatteland Technology AS. The products may not be copied or duplicated in any way.