Hatteland Display hereby informs about the following Product Change.
- Subject: HDD LED, Reset Button Aperture & IP66 - MMC Panel Computers.
- Applies to all Maritime Multi Computers (MMC) Series 1.
Series 1, redesigned - schedule update:
Due to adoptions, design reasons and capacity, please consider the following detailed re-schedule.
Validity
The following schedule is valid for sizes of 15”, 19” and 23”.
All other sizes will follow afterwards.
Preliminary Datasheets and CAD drawings
The outer dimensions and connector placements are already fixed. Tosmetic changes during the next weeks.
- 19” available now on requests
- 23” available now on requests
- 15” available mid of July 2007
Final Design release for Hardware and Electronics
Mid September 2007
Expected final IEC test results
1st week of November 2007
0-Series (limited volume) of 15”, 19” and 23”
Mid December 2007
Start of Mass Production of 15”, 19” and 23” , redesigned
January 2008
First deliveries of 15”, 19” and 23” , redesigned
February 2008
Changes that apply for HT 404P4 STD & HT 405P4 STD:
- Standard processor Intel® Pentium®4 3.0 GHz changed to Intel® Pentium®4 3.4 GHz.
- This change will be effective during April 2007.
Changes that apply for HT 404XE STD:
- Slight redesign of the removable hard drive tray. Frontal area of tray changes from plastic to metal.
- PCB / electronics that connects to hard drive trays redesigned, but functionality stays the same for customers.
- Possibility for SATA-II option added to PCB / electronics. Future option.
- This change will be effective during April / May 2007.
The Chipsets on the Video Controller (for MMD Series 1) used to date are approaching their End of Life. Initiating re-design with two further objectives: a) Improving the Quality level further. b) Making the product more cost effective.
Applies for the following Maritime Multi Displays (MMD) models: JH 15T05 xxx, JH 17T02 xxx, JH 19T02 xxx, JH 20T03 xxx, JH 20T06 xxx, JH 23T02 xxx. Including all variations and Custom OEM products.
Highlights for next generation MMD Series 1: Increased reliability through fewer modules and cable connections Additional signal inputs Enhanced picture quality New dual power solution Switched AC power out as standard IP22 Desk mount, IP66 Console mount Keep form-fit-function
Small technical changes for our Maritime Stand-alone Computers and Panel Computers - Series 1. The serial communication and RS422 functionality revision under development Applies for HT B04CM/PM STD, JH 10T08 MMC, JH 15T05 MMC, JH 19T02 MMC, JH 23T02 MMC Final implementation date not yet set.
Minor change of components regarding the fan control and health status monitoring. BIOS has been updated to support RoHS compliant board. Onboard GigaBIT LAN controller changed from Intel 82541GI to Intel 82541PI. Applies for HT B04CM/PM STD, JH 10T08 MMC, JH 15T05 MMC, JH 19T02 MMC, JH 23T02 MMC Effective from December 2006
Change of Audio controller chip on the motherboard. Old model Realtek ALC650, new model ALC655. Applies for HT 205P4 STD, HT B04PM/CM STD, JH 19T02 MMC and JH 23T02 MMC Effective from January 2007
Removeable hatch added to casing for accessing comport switches. Change between RS232, RS422 and RS485 modes. LAN ports - Added functionality to LAN LEDs. (Indicates link even if computer is off). Internal mechanical change to fully support "half-length" PCI cards.
Information, pictures, illustrations and content may not, in whole or in part, be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine-readable form from this website without the prior
written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
»
2009
Change of RAM - HT 404XE Rackmount Computer 