Hatteland Technology AS - HN G1080A

Type Number:

HN G1080A

Description:

8-port slim type unmanaged Gigabit

Physical Ports:

8 x 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX

Technology:

Ethernet Standards: IEEE 802.3 for 10Base-T, IEEE 802.3u for
100Base-TX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control

MAC Table: 4096 MAC addresses
Jumbo Frame up to 9k bytes
Store-and-Forward transmission

LED Indicators:

Power indicator: Green Power LED x 2
Fault indicator: Amber Indicate PWR1 or PWR2 failure

10/100/1000Base-T(X) RJ45 port indicator: Left LED for Link/Act indicator:
Green for 1Gbps connection, Amber for 10/100Mbps connection. Right
Amber LED for Full/Half-Duplex indicator

DIP-Switch:

DIP-Switch 1: Power-1 failed warning (ON) enable, (OFF) disable
DIP-Switch 2: Power-2 failed warning (ON) enable, (OFF) disable

Fault Contact:

Relay output to carry capacity of 1A at 24VDC

Reset Function:

None

Power Specifications:

Redundant Input power: Dual DC inputs.
12 ~ 48VDC on 6-pin terminal block.
Power consumption (Typ.): 5.5 Watts
Overload current protection: Present
Reverse polarity protection: Present

Physical Characteristics:

Enclosure: IP-30
Dimensions:
W:26.10 [1.03''] x H:144.30 [5.68''] x D:94.90 [3.74''] mm [inch]
Weight: 390g

Environmental:

Storage Temperature: -40 to +85°C (-40 to 185°F)
Operating Temperature: -40 to +70°C (-40 to 158°F)
Operating Humidity: 5% to 95% Non-condensing

Regulatory approvals:

EMC: CE EMC (EN55024,EN 55032), FCC Part 15 B

EMI: EN55032, CISPR 32, EN61000-3-2, EN61000-3-3,
FCC Part 15 B class A

EMS: EN55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),
IEC/EN 61000-4-4 (EFT), IEC/EN61000-4-5 (Surge),
IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8 (PFMF),
IEC/EN 61000-4-11 (DIP))

Shock: IEC60068-2-27
Free Fall: IEC60068-2-31
Vibration: IEC60068-2-6
Safety: EN60950-1 compliant

Type Approvals:

IEC 60945 4th (EN 60945:2002), IACS E10,
EU RO MR - Mutual Recognition (pending)

MTBF:

875918 hours

Warranty:

5 years

Contents of Package:

• 1 x HN G1080A
• 1 x Quick Installation Guide
• 1 x Din-Rail Kit
• 1 x Wall-Mount Kit

Accessories:

• SDR-120-24: 1 x Power supply 24 VDC, 5A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-120-48: 1 x Power supply 48 VDC, 2.5A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-240-24: 1 x Power supply 24 VDC, 10A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-240-48: 1 x Power supply 48 VDC, 5A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-480-24: 1 x Power supply 24 VDC, 20A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL
• SDR-480-48: 1 x Power supply 48 VDC, 10A, 6-pin Terminal Block 5.08,
Type Approved: DNV-GL

Specifications last updated: February 28, 2020 - 10:24


Copyright © 2020 Hatteland Technology AS All international rights reserved. Contact us: +47 4814 2200 - mail@hattelandtechnology.com	Information, pictures, illustrations and content may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form from this website without the prior written consent of Hatteland Technology AS. The products may not be copied or duplicated in any way.